What are the methods to reduce the wear of Raymond mill?
Raymond mill is a commonly used grinding equipment, which is widely used in mining, metallurgy and other industries. The equipment mainly relies on the grinding roller to grind the material on the grinding ring under the action of centrifugal force to achieve the effect of grinding. Therefore, the grinding roller plays a vital role in the Raymond mill and is easy to wear. This article mainly introduces several effective methods to reduce the wear of the Raymond mill for your reference, and I hope it will be helpful to everyone.
1. Wear is inevitable during the production of the Raymond mill, and it is feasible to reduce the wear to a minimum. Among them, the requirements for the grinding roller are the material, and the replacement cycle will be longer. The grinding roller and the grinding ring need to be checked regularly. The work of the grinding roller assembly is relatively bad, and the bearings need to be lubricated and cleaned regularly. If severe wear is found, it should be replaced immediately to avoid damage to other parts.
2. The bearings of the Raymond mill bear the load operation of the entire grinding equipment. If it is produced for a long time, the bearing wear will directly affect the operation of the equipment. Therefore, the requirement for the bearings is to pay attention to lubrication and regularly maintain the bearings. At the same time, we should also pay attention to the change of bearing temperature after the Raymond mill is running, as well as the damage to the bearing caused by some other factors.
3. After the Raymond mill is started, it needs to change the oil once a week. Each time the oil is changed, the old oil should be drained, and kerosene or diesel should be used to clean the inside. After cleaning, the oil should be drained and new lubricating oil should be injected.
4. Most Raymond mills are made of wear-resistant materials and have a long service life. The grinding rollers and grinding rings use high chromium materials instead of high manganese steel to improve the reliability of the equipment.
Statement: If the content on this site infringes upon the legitimate rights and interests of the original author, please contact this site to delete it.
