1. Basic structure and working principle of crusher

The crusher consists of crusher, transmission device, motor, conveyor belt and other components. Its working principle is to drive the transmission device through the motor to make the crusher rotate at high speed, so that the material is crushed under the action of centrifugal force.

2. Preparation before crushing

Before the crushing operation, inspection and preparation are required. First, check whether the various parts of the crusher are deformed, broken, etc., and check whether the electrical system is normal. Then select the appropriate screen and crusher model according to the needs. Finally, the materials should be classified and cleaned before crushing to ensure that the materials can be fully crushed.

3. Precautions during crushing

During the crushing process, the following matters need to be noted:

1. Operate strictly in accordance with the instructions for use of the crusher;

2. Before the crusher is turned on, make sure that all personnel are away from the crusher and turn on the protective equipment;

3. Before the crushed material enters the crusher, the feeding equipment should be turned on first;

4. When the crusher has abnormal noise or abnormal conditions, it should be stopped immediately for inspection and troubleshooting;

5. Make sure that the crusher is cleaned after each batch of materials is crushed.

4. Cleaning after crushing

After the crushing operation is completed, cleaning work is required to ensure the normal service life of the crusher. First, turn off the power of the crusher and clean the inside and outside of the crusher to ensure that there are no debris and residues. Then check whether the crusher has any faults or parts that need to be replaced, and perform maintenance.

In short, the correct operation process of the crusher can effectively ensure the working efficiency and service life of the crusher. After carefully reading this article, I believe that readers have mastered the operation process and precautions of the crusher, and can use the crusher accurately and smoothly in actual operation.