Four common crushing methods of crusher
Different types of crushers have different functions because they have different crushing principles, which are actually different crushing methods. They can crush materials of different properties. Here we summarize the four major crushing methods of the equipment.
Crushing method 1: Crushing
This method mainly places the material between two working surfaces. After applying pressure, the material is crushed because the compressive stress reaches its compressive strength. This crushing method is suitable for the crushing process of large pieces of material. Generally speaking, the crushing method of jaw crushers and cone crushers belongs to the lamination principle. The wear of wear-resistant parts in production is relatively small. This can not only complete the crushing process of materials, but also reduce the cost of production;
Crushing method 2: Splitting
This method is to place the material between a plane and a working plane with sharp edges. When the working plane with sharp edges squeezes the material, the material will be split along the direction of the pressure line. The reason for the splitting is that the tensile stress on the splitting plane reaches or exceeds the tensile strength limit of the material;
Crushing method 3: Folding
This method mainly refers to the material being subjected to The material is crushed by the bending stress. The material is subjected to the concentrated load of the two-point simply supported beam or multi-point beam in the crusher. When the bending stress of the material reaches the bending strength of the material, it is broken and crushed;
Crushing method 4: Impact crushing
This crushing method refers to the crushing of the material by the impact force. Since its crushing force is instantaneous, its crushing efficiency is high, the crushing ratio is large, and the energy consumption is low. Common equipment using the impact crushing principle includes impact crushers;
The article mainly introduces the four major crushing methods of the crusher, which are: crushing, splitting, folding and impact crushing. The above article introduces these four crushing methods in detail. From the analysis, it can be seen that different crushing methods have different characteristics, which can complete the processing of materials of different properties and meet the market demand for finished products of different qualities.
Statement: If the content on this site infringes upon the legitimate rights and interests of the original author, please contact this site to delete it.